16.4.1UDC（USB设备控制器）和Gadget（小配件）驱动的关键数据结构与API
USB设备控制器（UDC）驱动指的是作为其他USB主机控制器外设的USB硬件设备上底层硬件控制器的驱动，该硬件和驱动负责将一个USB设备依附于一个USB主机控制器上。例如，当某运行Linux系统的手机作为PC的U盘时，手机中的底层USB控制器行使USB设备控制器的功能，这时运行在底层的是UDC驱动，手机要成为U盘，在UDC驱动之上需要另外一个驱动，对于USB大容量存储器而言，这个驱动为File Storage驱动，称为Function驱动。
图16.1Linux USB驱动总体结构
从图16.1左边看，USB设备驱动调用USB核心的API，具体驱动与SoC无关；从图16.1右边看，Function驱动调用通用的Gadget FunctionAPI，具体Function驱动也与SoC无关。
UDC驱动和Function驱动都位于内核的drivers/usb/gadget目录，如drivers/usb/gadget/udc下面的
at91_udc.c、omap_udc.c、s3c2410_udc.c等是对应SoC平台上的UDC驱动，而drivers/usb/gadget/function目录下的f_serial.c、f_mass_storage.c、f_rndis.c等文件实现了一些Gadget功能，重要的Function驱动如下所
示。
Ethernet over USB：该驱动模拟以太网网口，支持多种运行方式——CDC Ethernet（实现标准的
Communications Device Class "Ethernet Model"协议）、CDC Subset以及RNDIS（微软公司对CDC Ethernet的变种实现）。
File-Backed Storage Gadget：最常见的U盘功能实现。
Serial Gadget：包括Generic Serial实现（只需要Bulk-in/Bulk-out端点+ep0）和CDC ACM规范实现。
Gadget MIDI（音乐设备数字接口）：暴露ALSA MIDI接口。
USB Video Class Gadget驱动：让Linux系统成为另外一个系统的USB视频采集源。
另外，drivers/usb/gadget源代码还实现一个Gadget文件系统（GadgetFS），将Gadget API接口暴露给应用层，以便在应用层实现用户空间的驱动。
USB设备控制器驱动，需要关心四个核心的数据结构，这些数据结构包括描述一个USB设备控制器的usb_gadget、UDC操作usb_gadget_ops、描述一个端点的usb_ep以及描述端点操作的usb_ep_ops结构体。UDC驱动围绕这些数据结构及其成员函数展开，代码清单16.30列出了这些关键的数据结构，代码路径：
include/linux/usb/gadget.h
代码清单16.30UDC驱动的关键数据结构
/**
* struct usb_gadget - represents a usb slave device
* @work: (internal use) Workqueue to be used for sysfs_notify()
* @ops: Function pointers used to access hardware-specific operations.
* @ep0: Endpoint zero, used when reading or writing responses to
* driver setup() requests
* @ep_list: List of other endpoints supported by the device.
* @speed: Speed of current connection to USB host.
* @max_speed: Maximal speed the UDC can handle. UDC must support this
* and all slower speeds.
* @state: the state we are now (attached, suspended, configured, etc)
* @name: Identifies the controller hardware type. Used in diagnostics
* and sometimes configuration.
* @dev: Driver model state for this abstract device.
* @out_epnum: last used out ep number
* @in_epnum: last used in ep number
* @sg_supported: true if we can handle scatter-gather
* @is_otg: True if the USB device port uses a Mini-AB jack, so that the
* gadget driver must provide a USB OTG descriptor.
* @is_a_peripheral: False unless is_otg, the "A" end of a USB cable
* is in the Mini-AB jack, and HNP has been used to switch roles
* so that the "A" device currently acts as A-Peripheral, not A-Host.
* @a_hnp_support: OTG device feature flag, indicating that the A-Host
* supports HNP at this port.
* @a_alt_hnp_support: OTG device feature flag, indicating that the A-Host
* only supports HNP on a different root port.
* @b_hnp_enable: OTG device feature flag, indicating that the A-Host
* enabled HNP support.
* @quirk_ep_out_aligned_size: epout requires buffer size to be aligned to
* MaxPacketSize.
* @xfer_isr_count: UI (transfer complete) interrupts count
* @usb_core_id: Identifies the usb core controlled by this usb_gadget.
* Used in case of more then one core operates concurrently.
* @bam2bam_func_enabled; Indicates function using bam2bam is enabled or not.
* @extra_buf_alloc: Extra allocation size for AXI prefetch so that out of
* boundary access is protected.
* @interrupt_num: Interrupt number for the underlying platform device.
*
* Gadgets have a mostly-portable "gadget driver" implementing device
* functions, handling all usb configurations and interfaces. Gadget
* drivers talk to hardware-specific code indirectly, through ops vectors.
* That insulates the gadget driver from hardware details, and packages
* the hardware endpoints through generic i/o queues. The "usb_gadget"
* and "usb_ep" interfaces provide that insulation from the hardware.
*
* Except for the driver data, all fields in this structure are
* read-only to the gadget driver. That driver data is part of the
* "driver model" infrastructure in 2.6 (and later) kernels, and for
* earlier systems is grouped in a similar structure that's not known
* to the rest of the kernel.
*
* Values of the three OTG device feature flags are updated before the
* setup() call corresponding to USB_REQ_SET_CONFIGURATION, and before
* driver suspend() calls. They are valid only when is_otg, and when the
* device is acting as a B-Peripheral (so is_a_peripheral is false).
*/
struct usb_gadget {
struct work_struct work;
/* readonly to gadget driver */
const struct usb_gadget_ops *ops;
struct usb_ep *ep0;
struct list_head ep_list; /* of usb_ep */
enum usb_device_speedspeed;
enum usb_device_speedmax_speed;
enum usb_device_statestate;
const char *name;
struct device dev;
unsigned out_epnum;
unsigned in_epnum;
unsigned sg_supported:1;
unsigned is_otg:1;
unsigned is_a_peripheral:1;
unsigned b_hnp_enable:1;
unsigned a_hnp_support:1;
unsigned a_alt_hnp_support:1;
unsigned quirk_ep_out_aligned_size:1;
bool remote_wakeup;
u32 xfer_isr_count;
u8usb_core_id;
bool l1_supported;
bool bam2bam_func_enabled;
u32 extra_buf_alloc;
int interrupt_num;
};
/**
* struct usb_ep - device side representation of USB endpoint
* @name:identifier for the endpoint, such as "ep-a" or "ep9in-bulk"
* @ops: Function pointers used to access hardware-specific operations.
* @ep_list:the gadget's ep_list holds all of its endpoints
* @maxpacket:The maximum packet size used on this endpoint. The initial
* value can sometimes be reduced (hardware allowing), according to
* the endpoint descriptor used to configure the endpoint.
* @maxpacket_limit:The maximum packet size value which can be handled by this
* endpoint. It's set once by UDC driver when endpoint is initialized, and
* should not be changed. Should not be confused with maxpacket.
* @max_streams: The maximum number of streams supported
* by this EP (0 - 16, actual number is 2^n)
* @mult: multiplier, 'mult' value for SS Isoc EPs
* @maxburst: the maximum number of bursts supported by this EP (for usb3)
* @driver_data:for use by the gadget driver.
* @address: used to identify the endpoint when finding descriptor that
* matches connection speed
* @desc: endpoint descriptor. This pointer is set before the endpoint is
* enabled and remains valid until the endpoint is disabled.
* @comp_desc: In case of SuperSpeed support, this is the endpoint companion
* descriptor that is used to configure the endpoint
* @ep_type: Used to specify type of EP eg. normal vs h/w accelerated.
* @ep_intr_num: Interrupter number for EP.
* @endless: In case where endless transfer is being initiated, this is set
* to disable usb event interrupt for few events.
*
* the bus controller driver lists all the general purpose endpoints in
* gadget->ep_list. the control endpoint (gadget->ep0) is not in that list,
* and is accessed only in response to a driver setup() callback.
*/
struct usb_ep {
void*driver_data;
const char *name;
const struct usb_ep_ops *ops;
struct list_head ep_list;
unsigned maxpacket:16;
unsigned maxpacket_limit:16;
unsigned max_streams:16;
unsigned mult:2;
unsigned maxburst:5;
u8 address;
const struct usb_endpoint_descriptor *desc;
const struct usb_ss_ep_comp_descriptor *comp_desc;
enum ep_typeep_type;
u8 ep_num;
u8 ep_intr_num;
boolendless;
};
/* the rest of the api to the controller hardware: device operations,
* which don't involve endpoints (or i/o).
*/
struct usb_gadget_ops {
int (*get_frame)(struct usb_gadget *);
int (*wakeup)(struct usb_gadget *);
int (*func_wakeup)(struct usb_gadget *, int interface_id);
int (*set_selfpowered) (struct usb_gadget *, int is_selfpowered);
int (*vbus_session) (struct usb_gadget *, int is_active);
int (*vbus_draw) (struct usb_gadget *, unsigned mA);
int (*pullup) (struct usb_gadget *, int is_on);
int (*restart)(struct usb_gadget *);
int (*ioctl)(struct usb_gadget *,
unsigned code, unsigned long param);
void (*get_config_params)(struct usb_dcd_config_params *);
int (*udc_start)(struct usb_gadget *,
struct usb_gadget_driver *);
int (*udc_stop)(struct usb_gadget *,
struct usb_gadget_driver *);
};
/* endpoint-specific parts of the api to the usb controller hardware.
* unlike the urb model, (de)multiplexing layers are not required.
* (so this api could slash overhead if used on the host side...)
*
* note that device side usb controllers commonly differ in how many
* endpoints they support, as well as their capabilities.
*/
struct usb_ep_ops {
int (*enable) (struct usb_ep *ep,
const struct usb_endpoint_descriptor *desc);
int (*disable) (struct usb_ep *ep);
struct usb_request *(*alloc_request) (struct usb_ep *ep,
gfp_t gfp_flags);
void (*free_request) (struct usb_ep *ep, struct usb_request *req);
int (*queue) (struct usb_ep *ep, struct usb_request *req,
gfp_t gfp_flags);
int (*dequeue) (struct usb_ep *ep, struct usb_request *req);
int (*set_halt) (struct usb_ep *ep, int value);
int (*set_wedge) (struct usb_ep *ep);
int (*fifo_status) (struct usb_ep *ep);
void (*fifo_flush) (struct usb_ep *ep);
int (*gsi_ep_op)(struct usb_ep *ep, void *op_data,
enum gsi_ep_op op);
};
备注：
在具体的UDC驱动中，需要封装usb_gadget和每个端点usb_ep，实现usb_gadget的usb_gadget_ops并实现端点的usb_ep_ops，完成usb_request。这些事情搞定后，注册一个UDC，通过usb_add_gadget_udc（）API来进行的，其原型为：
include/linux/usb/gadget.h
int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget);
drivers/usb/gadget/udc/udc-core.c
/**
* usb_add_gadget_udc_release - adds a new gadget to the udc class driver list
* @parent: the parent device to this udc. Usually the controller driver's
* device.
* @gadget: the gadget to be added to the list.
* @release: a gadget release function.
*
* Returns zero on success, negative errno otherwise.
*/
int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
void (*release)(struct device *dev))
{
struct usb_udc*udc;
intret = -ENOMEM;
udc = kzalloc(sizeof(*udc), GFP_KERNEL);
if (!udc)
goto err1;
dev_set_name(&gadget->dev, "gadget");
INIT_WORK(&gadget->work, usb_gadget_state_work);
gadget->dev.parent = parent;
#ifdef CONFIG_HAS_DMA
dma_set_coherent_mask(&gadget->dev, parent->coherent_dma_mask);
gadget->dev.dma_parms = parent->dma_parms;
gadget->dev.dma_mask = parent->dma_mask;
#endif
if (release)
gadget->dev.release = release;
else
gadget->dev.release = usb_udc_nop_release;
ret = device_register(&gadget->dev);
if (ret)
goto err2;
device_initialize(&udc->dev);
udc->dev.release = usb_udc_release;
udc->dev.class = udc_class;
udc->dev.groups = usb_udc_attr_groups;
udc->dev.parent = parent;
ret = dev_set_name(&udc->dev, "%s", kobject_name(&parent->kobj));
if (ret)
goto err3;
udc->gadget = gadget;
mutex_lock(&udc_lock);
list_add_tail(&udc->list, &udc_list);
ret = device_add(&udc->dev);
if (ret)
goto err4;
usb_gadget_set_state(gadget, USB_STATE_NOTATTACHED);
mutex_unlock(&udc_lock);
return 0;
err4:
list_del(&udc->list);
mutex_unlock(&udc_lock);
err3:
put_device(&udc->dev);
err2:
put_device(&gadget->dev);
kfree(udc);
err1:
return ret;
}
EXPORT_SYMBOL_GPL(usb_add_gadget_udc_release);
/**
* usb_add_gadget_udc - adds a new gadget to the udc class driver list
* @parent: the parent device to this udc. Usually the controller
* driver's device.
* @gadget: the gadget to be added to the list
*
* Returns zero on success, negative errno otherwise.
*/
int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget)
{
return usb_add_gadget_udc_release(parent, gadget, NULL);
}
EXPORT_SYMBOL_GPL(usb_add_gadget_udc);
结论：
注册UDC（USB设备控制器）之前，需要先把usb_gadget这个结构体的ep_list（端点链表）填充好，并填充好usb_gadget的usb_gadget_ops以及每个端点的usb_gadget_ops。
而Gadget的Function，需要自己填充usb_interface_descriptor、usb_endpoint_descriptor，合成一些
usb_descriptor_header，并实现usb_function结构体的成员函数。usb_function结构体定义于
include/linux/usb/composite.h中，其形式如代码清单16.31所示。
代码清单16.31usb_function结构体
/**
* struct usb_function - describes one function of a configuration
* @name: For diagnostics, identifies the function.
* @strings: tables of strings, keyed by identifiers assigned during bind()
* and by language IDs provided in control requests
* @fs_descriptors: Table of full (or low) speed descriptors, using interface and
* string identifiers assigned during @bind(). If this pointer is null,
* the function will not be available at full speed (or at low speed).
* @hs_descriptors: Table of high speed descriptors, using interface and
* string identifiers assigned during @bind(). If this pointer is null,
* the function will not be available at high speed.
* @ss_descriptors: Table of super speed descriptors, using interface and
* string identifiers assigned during @bind(). If this
* pointer is null after initiation, the function will not
* be available at super speed.
* @config: assigned when @usb_add_function() is called; this is the
* configuration with which this function is associated.
* @os_desc_table: Table of (interface id, os descriptors) pairs. The function
* can expose more than one interface. If an interface is a member of
* an IAD, only the first interface of IAD has its entry in the table.
* @os_desc_n: Number of entries in os_desc_table
* @bind: Before the gadget can register, all of its functions bind() to the
* available resources including string and interface identifiers used
* in interface or class descriptors; endpoints; I/O buffers; and so on.
* @unbind: Reverses @bind; called as a side effect of unregistering the
* driver which added this function.
* @free_func: free the struct usb_function.
* @mod: (internal) points to the module that created this structure.
* @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may
* initialize usb_ep.driver data at this time (when it is used).
* Note that setting an interface to its current altsetting resets
* interface state, and that all interfaces have a disabled state.
* @get_alt: Returns the active altsetting. If this is not provided,
* then only altsetting zero is supported.
* @disable: (REQUIRED) Indicates the function should be disabled. Reasons
* include host resetting or reconfiguring the gadget, and disconnection.
* @setup: Used for interface-specific control requests.
* @suspend: Notifies functions when the host stops sending USB traffic.
* @resume: Notifies functions when the host restarts USB traffic.
* @get_status: Returns function status as a reply to
* GetStatus() request when the recipient is Interface.
* @func_suspend: callback to be called when
* SetFeature(FUNCTION_SUSPEND) is received
* @func_is_suspended: Tells whether the function is currently in
* Function Suspend state (used in Super Speed mode only).
* @func_wakeup_allowed: Tells whether Function Remote Wakeup has been allowed
* by the USB host (used in Super Speed mode only).
* @func_wakeup_pending: Marks that the function has issued a Function Wakeup
* while the USB bus was suspended and therefore a Function Wakeup
* notification needs to be sent once the USB bus is resumed.
*
* A single USB function uses one or more interfaces, and should in most
* cases support operation at both full and high speeds. Each function is
* associated by @usb_add_function() with a one configuration; that function
* causes @bind() to be called so resources can be allocated as part of
* setting up a gadget driver. Those resources include endpoints, which
* should be allocated using @usb_ep_autoconfig().
*
* To support dual speed operation, a function driver provides descriptors
* for both high and full speed operation. Except in rare cases that don't
* involve bulk endpoints, each speed needs different endpoint descriptors.
*
* Function drivers choose their own strategies for managing instance data.
* The simplest strategy just declares it "static', which means the function
* can only be activated once. If the function needs to be exposed in more
* than one configuration at a given speed, it needs to support multiple
* usb_function structures (one for each configuration).
*
* A more complex strategy might encapsulate a @usb_function structure inside
* a driver-specific instance structure to allows multiple activations. An
* example of multiple activations might be a CDC ACM function that supports
* two or more distinct instances within the same configuration, providing
* several independent logical data links to a USB host.
*/
struct usb_function {
const char *name;
int intf_id;
struct usb_gadget_strings **strings;
struct usb_descriptor_header **fs_descriptors;
struct usb_descriptor_header **hs_descriptors;
struct usb_descriptor_header **ss_descriptors;
struct usb_configuration *config;
struct usb_os_desc_table *os_desc_table;
unsigned os_desc_n;
/* REVISIT: bind() functions can be marked __init, which
* makes trouble for section mismatch analysis. See if
* we can't restructure things to avoid mismatching.
* Related: unbind() may kfree() but bind() won't...
*/
/* configuration management: bind/unbind */
int(*bind)(struct usb_configuration *,struct usb_function *);
void(*unbind)(struct usb_configuration *,struct usb_function *);
void(*free_func)(struct usb_function *f);
struct module*mod;
/* runtime state management */
int(*set_alt)(struct usb_function *,unsigned interface, unsigned alt);
int(*get_alt)(struct usb_function *,unsigned interface);
void(*disable)(struct usb_function *);
int(*setup)(struct usb_function *,
const struct usb_ctrlrequest *);
void(*suspend)(struct usb_function *);
void(*resume)(struct usb_function *);
/* USB 3.0 additions */
int(*get_status)(struct usb_function *);
int(*func_suspend)(struct usb_function *, u8 suspend_opt);
unsigned func_is_suspended:1;
unsigned func_wakeup_allowed:1;
unsigned func_wakeup_pending:1;
/* private: */
/* internals */
struct list_head list;
DECLARE_BITMAP(endpoints, 32);
const struct usb_function_instance *fi;
};
备注：
fs_descriptors是全速和低速的描述符表；hs_descriptors是高速描述符表；ss_descriptors是超高速描述符表。bind（）完成在Gadget注册时获取I/O缓冲、端点等资源。
在usb_function的成员函数以及各种描述符准备好后，内核通过usb_function_register（）API来完成Gadget Function的注册，该API的原型为：
include/linux/usb/composite.h
int usb_function_register(struct usb_function_driver *newf);
其函数定义如下：
drivers/usb/gadget/functions.c
int usb_function_register(struct usb_function_driver *newf)
{
struct usb_function_driver *fd;
int ret;
ret = -EEXIST;
mutex_lock(&func_lock);
list_for_each_entry(fd, &func_list, list) {
if (!strcmp(fd->name, newf->name))
goto out;
}
ret = 0;
list_add_tail(&newf->list, &func_list);
out:
mutex_unlock(&func_lock);
return ret;
}
EXPORT_SYMBOL_GPL(usb_function_register);
void usb_function_unregister(struct usb_function_driver *fd)
{
mutex_lock(&func_lock);
list_del(&fd->list);
mutex_unlock(&func_lock);
}
EXPORT_SYMBOL_GPL(usb_function_unregister);
在Gadget驱动中，用usb_request结构体来描述一次传输请求，这个结构体的地位类似于USB主机侧的URB。usb_request结构体的定义如代码清单16.32所示。
代码清单16.32usb_request结构体
include/linux/usb/gadget.h
/**
* struct usb_request - describes one i/o request
* @buf: Buffer used for data. Always provide this; some controllers
* only use PIO, or don't use DMA for some endpoints.
* @dma: DMA address corresponding to 'buf'. If you don't set this
* field, and the usb controller needs one, it is responsible
* for mapping and unmapping the buffer.
* @sg: a scatterlist for SG-capable controllers.
* @num_sgs: number of SG entries
* @num_mapped_sgs: number of SG entries mapped to DMA (internal)
* @length: Length of that data
* @stream_id: The stream id, when USB3.0 bulk streams are being used
* @no_interrupt: If true, hints that no completion irq is needed.
* Helpful sometimes with deep request queues that are handled
* directly by DMA controllers.
* @zero: If true, when writing data, makes the last packet be "short"
* by adding a zero length packet as needed;
* @short_not_ok: When reading data, makes short packets be
* treated as errors (queue stops advancing till cleanup).
* @dma_pre_mapped: Tells the USB core driver whether this request should be
* DMA-mapped before it is queued to the USB HW. When set to true, it means
* that the request has already been mapped in advance and therefore the
* USB core driver does NOT need to do DMA-mapping when the request is
* queued to the USB HW.
* @complete: Function called when request completes, so this request and
* its buffer may be re-used. The function will always be called with
* interrupts disabled, and it must not sleep.
* Reads terminate with a short packet, or when the buffer fills,
* whichever comes first. When writes terminate, some data bytes
* will usually still be in flight (often in a hardware fifo).
* Errors (for reads or writes) stop the queue from advancing
* until the completion function returns, so that any transfers
* invalidated by the error may first be dequeued.
* @context: For use by the completion callback
* @list: For use by the gadget driver.
* @status: Reports completion code, zero or a negative errno.
* Normally, faults block the transfer queue from advancing until
* the completion callback returns.
* Code "-ESHUTDOWN" indicates completion caused by device disconnect,
* or when the driver disabled the endpoint.
* @actual: Reports bytes transferred to/from the buffer. For reads (OUT
* transfers) this may be less than the requested length. If the
* short_not_ok flag is set, short reads are treated as errors
* even when status otherwise indicates successful completion.
* Note that for writes (IN transfers) some data bytes may still
* reside in a device-side FIFO when the request is reported as
* complete.
* @udc_priv: Vendor private data in usage by the UDC.
*
* These are allocated/freed through the endpoint they're used with. The
* hardware's driver can add extra per-request data to the memory it returns,
* which often avoids separate memory allocations (potential failures),
* later when the request is queued.
*
* Request flags affect request handling, such as whether a zero length
* packet is written (the "zero" flag), whether a short read should be
* treated as an error (blocking request queue advance, the "short_not_ok"
* flag), or hinting that an interrupt is not required (the "no_interrupt"
* flag, for use with deep request queues).
*
* Bulk endpoints can use any size buffers, and can also be used for interrupt
* transfers. interrupt-only endpoints can be much less functional.
*
* NOTE: this is analogous to 'struct urb' on the host side, except that
* it's thinner and promotes more pre-allocation.
*/
struct usb_request {
void*buf;
unsigned length;
dma_addr_t dma;
struct scatterlist *sg;
unsigned num_sgs;
unsigned num_mapped_sgs;
unsigned stream_id:16;
unsigned no_interrupt:1;
unsigned zero:1;
unsigned short_not_ok:1;
unsigned dma_pre_mapped:1;
void(*complete)(struct usb_ep *ep, struct usb_request *req);
void*context;
struct list_head list;
intstatus;
unsigned actual;
unsigned udc_priv;
};
在include/linux/usb/gadget.h文件中，还封装了一些常用的API，以供Gadget Function驱动调用，从而便于它们操作端点，如下所示。
（1）使能和禁止端点
static inline int usb_ep_enable(struct usb_ep *ep);
static inline int usb_ep_enable(struct usb_ep *ep)
{
return ep->ops->enable(ep, ep->desc);
}
static inline int usb_ep_disable(struct usb_ep *ep);
static inline int usb_ep_disable(struct usb_ep *ep)
{
return ep->ops->disable(ep);
}
（2）分配和释放usb_request
用于分配和释放一个依附于某端点的usb_request
static inline struct usb_request *usb_ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
{
return ep->ops->alloc_request(ep, gfp_flags);
}
static inline void usb_ep_free_request(struct usb_ep *ep, struct usb_request *req)
{
ep->ops->free_request(ep, req);
}
（3）提交和取消usb_request
static inline int usb_ep_queue(struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags)
{
return ep->ops->queue(ep, req, gfp_flags);
}
static inline int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
{
return ep->ops->dequeue(ep, req);
}
备注：
usb_ep_queue函数告诉UDC完成usb_request（读写缓冲），当请求被完成后，与该请求对应的completion（）函数会被调用。
（4）端点FIFO管理
static inline int usb_ep_fifo_status(struct usb_ep *ep)
{
if (ep->ops->fifo_status)
return ep->ops->fifo_status(ep); // 返回目前FIFO中的字节数
else
return -EOPNOTSUPP;
}
static inline void usb_ep_fifo_flush(struct usb_ep *ep)
{
if (ep->ops->fifo_flush)
ep->ops->fifo_flush(ep); //冲刷掉FIFO中的数据
}
（5）端点自动配置
struct usb_ep *usb_ep_autoconfig(struct usb_gadget *, struct usb_endpoint_descriptor *);
根据端点描述符及控制器端点情况，分配一个合适的端点。
