压缩屈服强度,compressive yield strength
1)compressive yield strength压缩屈服强度
1.Based on the compression and tension curves of spherical pores Al foam,the densification starting point,energy absorption,compressive yield strength,and tension properties are investigated.采用Gibson-Ashby的模型来分析球形孔泡沫纯铝的压缩屈服强度和抗拉强度,吻合效果良好。
2.Based on compression curves of spherical pores Al foam measured,compressive yield strength and energy absorption were investigated.在获得球形孔泡沫纯铝压缩应力-应变曲线基础上,研究了泡沫纯铝的压缩屈服强度、吸能能力。
3.Based on compression curves of spherical pores Al foam,compressive yield strength and energy absorption had been investigated.采用Gibson-Ashby的模型来分析球形孔泡沫纯铝的压缩屈服强度,吻合良好。
2)compressive yield strength at elevated temperature高温压缩屈服强度
3)internal yield pressure strength内压屈服强度
4)compressive yielding压缩屈服
1.Numerical simulation oncompressive yielding behavior of closed-cell metal foam with low density低密度闭孔金属泡沫压缩屈服行为的数值模拟
英文短句/例句
1.Numerical simulation on compressive yielding behavior of closed-cell metal foam with low density低密度闭孔金属泡沫压缩屈服行为的数值模拟
2.She wavered, quailed, gave way.她动摇了，畏缩了，屈服了。
3.Do not succumb to social pressures.别屈服于社会压力。
4.The government succumbed to public pressure.政府屈服于公众压力。
5.The turtle at last gives up by pulling his feet under his shell,海龟终于屈服了，将4条腿缩进壳内。
6.a team that never folded under pressure.一个从不屈服于压力的球队
7.The Director had to Bow down to the pressure to resign.董事必须屈服于辞职的压力。
8.not yielding to pressure or easily penetrated.不向压力屈服或者不容易被穿刺。
9.lacking stiffness and giving way to pressure.缺少硬度而且容易向压力屈服。
10.Capacity or inclination to yield under pressure.支持不住在压力下屈服的能力或倾向
11.The government has succumbed to pressure from the press.政府已屈服于报界的压力。
12.It was unseemly to yield to such pressure.要是屈服于这种压力，那是不体面的。
13.The government has surrendered to pressure of big business and lowered tax rates.政府屈服于大商业的压力降低了税率。
14.We" ve already made it clear that we will not yield to pressure.我们已经表明我们不会屈服于压力。
15.But thoughts of giving it all up were not for her.但她从没想到屈服于压力。
16.Three-dimensional Finite Element Analysis of Thoracolumbar Spine Bending Compression Injuries;胸腰段屈曲压缩损伤的三维有限元分析
17.produced by or subjected to forcing: forced-air heating.在压力下产生的或屈服于压力的：暖风供暖。
press and uncompress folders on the server computer.压缩或解压缩服务器计算机上的文件夹。
相关短句/例句
compressive yield strength at elevated temperature高温压缩屈服强度
3)internal yield pressure strength内压屈服强度
4)compressive yielding压缩屈服
1.Numerical simulation oncompressive yielding behavior of closed-cell metal foam with low density低密度闭孔金属泡沫压缩屈服行为的数值模拟
5)yield strength屈服强度
1.Effect of phosphorus on theyield strength of as-quenched GH761 alloy;磷对GH761合金固溶水淬组织屈服强度的影响
2.Study of influence factors ofyield strength of oil and gas pipeline;油气管道屈服强度影响因素的研究
3.A modeling study of theyield strength of HRB335 hot rolled ribbed bar;HRB335热轧带肋钢筋屈服强度模型研究
6)yield stress屈服强度
1.Based on the plain carbon steel with the chemical composition of 200MPa class steel the products of theyield stress of 400～500 MPa class and high-quality mechanical properties can be produced using the technology of chemistry tightly-tuning and controlled rolling - controlled cooling.以屈服强度为 2 0 0MPa级的普碳钢为基本成分 ,采用成分微调与控轧控冷工艺相结合的技术路线 ,可将屈服强度提高到 4 0 0～ 5 0 0MPa,同时保证良好的综合性能。
2.From the tests, a two-stage linear relation has been found betweenyield stress(σ_s) and strain rate(ε),σ_s=σ_0+klgε.对４种金属材料进行了应变率为１０~（－４）—１０~３ｓ~（－１）的拉伸试验，结果表明，屈服强度随应变率的升高分两阶段线性升高。
延伸阅读
屈服强度分子式：CAS号：性质：是材料屈服的临界应力值。（1）对于屈服现象明显的材料，刷子服强度就是在屈服点在应力（屈服值）；（2）对于屈服现象不明显的材料，与应力-应变的直线关系的极限偏差达到规定值（通常为0.2%的永久形变）时的应力。通常用作固体材料力学机械性能的评价指标，是材料的实际使用极限。因为材料屈服后产生颈缩，应变增大，使材料失去了原有功能。
