压力调节阀,pressure regulating valve
1)pressure regulating valve压力调节阀
英文短句/例句
1.pressure controlled valve压力调节阀压力控制阀
2.back pressure regulator背压调节器吸入压力调节阀蒸发压力调节阀
3.Manifold shall have safety pressure relieve valve, pressure regulators, and pressure gauges indicating inlet and outlet pressure, bleed valve (vent valve) and pigtail for cylinder connections.气体管路需要有安全压力释放阀门、压力调节阀门、压力表来指示气体压力。
4.A miniature plastic water pressure regulator shall be installed where indicated on the plans.在计划指示的地方应该安装微型塑料水压力调节阀。
5.The Controlling System about the Automatic Adjustment of Press Control Values Based on PLC;基于PLC的压力控制阀出口压力自动调节设备的控制
6.spring-loaded regulator弹簧型自力式调节阀
7.Incorporate a calibrated adjustment feature for setting the valve to the relief pressure required.具有刻度可调节功能，可以根据需要设置阀门的压力最高值。
8.Pressure Control of Large-flow Mixed Gas Based on Electro-hydraulic Control Valve基于电液调节阀的大流量混合煤气压力控制研究
9.Efficient and Energy Saving Prcduct-Self force Adjusting Valve高效、节能的产品——自力式调节阀
10.Study on Superposition Throttle-Slice and Opening Valve Pressure of Hydro-pneumatic Spring油气弹簧多片叠加节流阀片与开阀压力研究
11.supercharger control bypass增压器调节容气量的旁通阀
12.The proportional relief valve is used to adjust control the pressure of hydraulic oil , therefore controls the brake moment by adjusting the thickness of oil film .用电液比例溢流阀对控制油压进行调节，从而调节油膜的厚度来控制制动力矩。
13.With the regulator adjusting knob turned fully counterclockwise, place both hands on the cylinder valve and open it slowly, allowing the pressure to rise gradually in the regulator.调整器的调节钮逆时针旋死后，两只手放在钢瓶阀门上，慢慢地开启，使调整器内的压力逐渐增加。
14.pneumatic and hydraulic pressure regulator气动及水压压力调节器
15.Selective calculation of adjustive valve frozen water system in air-conditioner空调冷冻水系统压差调节阀的选择计算
16.internally piloted regulator整体指挥器操作型自力式调节阀
17.pilot-operated regulator指挥器操作型自力式调节阀
18.externally-piloted regulator组合指挥器操作型自力式调节阀
相关短句/例句
downstream-pressure controller阀后压力调节阀
3)upstream-pressure controller阀前压力调节阀
4)pressure control valve压力控制阀，压力调节阀
5)pressure controlled valve压力调节阀;压力控制阀
6)Gas-electricity pressuse valve电-气压力调节阀
延伸阅读
溢流阀、顺序阀、减压阀的比较溢流阀减压阀顺序阀控制油路的特点通过调整弹簧的压力控制进油路的压力，保证进口压力恒定，p2＝0通过调整弹簧的压力控制出油口的压力，保证出口压力p2稳定直控式－通过调定调压弹簧的压力控制进油路压力；夜控式－由单独油路控制压力出油口情况出油口与油箱相连出油口与减压回路相连出油口与工作回路相连泄漏形式内泄式外泄式内泄式进油口状态及压力值常态常闭（原始状态）常开（原始状态）常闭（原始状态）工作状态进出油口相通，进油口压力为调整压力进油口压力低于出油口压力，出油口压力稳定在调定值上进出油口相通，进油口压力允许继续升高联接方式并联串联实现顺序动作式串联作卸荷阀用时并联功用定压、溢流或安全作用限压、稳压、保压减压、稳压不控制系统的压力，只利用系统的压力变化控制油路的通断进油腔压力p1控制阀芯移动出油腔压力p2控制阀芯移动进油腔压力p1控制阀芯移动
