楼板厚度,thickness of slab
1)thickness of slab楼板厚度
1.The effect ofthickness of slab on the seismic performance of super high-rise building structure;楼板厚度对超高层结构抗震性能的影响分析
2.At present, in order to improve the effect caused by vertical rigidity revulsion of strengthened storey, structure engineers always take the measure of increasing thethickness of slab, which is the strengthened storey or near the strengthened storey.为了改善加强层引起的结构竖向刚度突变产生的影响,目前结构设计中通常采用加厚加强层或相邻几层楼板厚度的方式。
英文短句/例句
1.Crack prevention-based selection method for thickness of L-shaped floorslab without beam基于裂缝病害防治的不规则无梁楼板厚度选取方法
2.The Important Problem during the Process of Current-pouring Floor;在现浇楼板施工中保护层厚度的控制方法
3.In- situ hollow floor hollow cylinder transverse direction equivalent thickness simplified numerical solution现浇空心楼板横筒方向等效厚度简化数值解法
4.Thickness or diameter, as of sheet metal or wire.直径，厚度金属板的厚度或线的直径
5.Development and Application of High Accuracy Gauge Control for Plate Mill中厚板高精度厚度控制的研究与应用
6.Spine-bulk: The thickness of the spine of a book block not including the thickness of the cover boards.脊厚:书芯厚度,它不包括书皮纸板的厚度。
7.critical thickness of an infinite slab无限平板的临界厚度
8.Calculation of Transversal Slab Thickness During Plate Rolling中厚板轧制过程横向厚度的计算方法
9.Determination of critical thickness of 12Cr2Mo1R heavy plate for equipments under critical hydrogen临氢设备用12Cr2Mo1R厚钢板临界厚度研究
10.Determination of Critical Thickness of Stiff Roof in Coal Mine Based on Thick Plate Theory基于厚板理论的水平煤层顶板临界厚度的分析
11.Analysis on Thick Layer of Structural Transformation Construction Technology in High-rise Comprehensive Building高层综合楼厚板结构转换层施工技术分析探讨
12.STEEL STRUCTURE FABRICATION AND CONSTRUCTION TECHNIQUES OF TOWER A OF BEIJING SEVEN STAR MORGAN PLAZA OFFICE BUILDING七星摩根广场写字楼A座钢结构厚板制作技术
13.Construction Technology of Thick Layer Plate Structure Conversion in Commercial and Residential High-rise Building高层商住楼厚板式结构转换层施工技术
14.Study on Monitoring Tactic for the Plate Thickness and Crown of Cold Rolling Strip;冷轧带钢板厚、板凸度监测策略的研究
15.Analysis and Improvement of Thickness Precision Controlling for Automotive Sheet汽车板产品厚度精度控制分析与改善
16.Influence of Bilateral Stiffness Difference of Wide Heavy Plate Mill on Thickness Deviation between Two Sides of Plate宽厚板轧机两侧刚度差异对两侧板厚偏差的影响
17."Traditional wooden staircases are constructed with stringers, Beams inclined to the angle of the staircase. Stringers are supported by newel posts, which also support the handrail, forming a Balustrade. "踏阶设在依楼梯角度倾斜的楼梯侧板之间,楼梯侧板支在立柱上,立柱也支承楼梯扶手和栏杆。
18.Steel plate with through-thickness characteristicsGB/T5313-1985厚度方向性能钢板
相关短句/例句
solid panel floor厚镶板楼板
3)equivalent thickness of glued double glass floors夹胶玻璃楼板等效厚度
4)slab rigidity楼板刚度
1.This article mainly introduced some problems of PKPM software that should be considered in building structure design,including determining reasonably the horizontal load,assumedslab rigidity,rigidity amplification coefficient of central beam,the moment modulation coefficient of the beam s end,and then elaborated the above problems to ensure the validity and reliability of the results.主要介绍了PKPM系列软件在建筑结构设计使用中合理确定水平荷载、假定楼板刚度、中梁刚度放大系数、梁端负弯矩调幅系数等方面应注意的问题,并就这些问题进行了较为详细的分析,以保证设计结果的正确性和可靠性。
2.The following paper introduces some problems should be noticed in the utilization of PKPM series software as rational assumption ofslab rigidity,rational selection of simulation construction mode and definition of shortpier shear wall structure,and analyzes these problems in detail,in order to increase design computational efficiency and to ensure accuracy and reliability of calculation result.主要介绍了PKPM系列软件使用中在合理假定楼板刚度、选择模拟施工方式、短肢剪力墙结构的界定方面应注意的一些问题,并就这些问题进行了较为详细的分析,以提高设计计算效率,同时保证了计算结果的精度及其可靠性。
5)floor stiffness楼板刚度
1.In order to study influence on response of mega steel-frame structures fromfloor stiffness an.通过对不同计算方案结果的比较分析,研究考虑楼板刚度与否和次框架对巨型钢框架结构反应的影响,为进一步深入研究巨型钢结构的抗震性能及抗震设计提供基础。
2.On the basis of these, the paper studies profoundly the influence on response, seismic design method and seismic behavior of the mega steel structures from thefloor stiffness and hypo-frame.在此基础上，深入研究了楼板刚度及次框架对巨型钢框架结构反应、抗震设计方法及抗震性能的影响。
3.Aiming at this important theoretical and engineering issue, this paper investigates the influence offloor stiffness on the seismic demands and seismic performance of building structures, based on a 20-stories steel benchmark high-rise building, through the static elasto-plastic analysis (pushover) and Incremental Dynamic Analysis (IDA).针对以上这一具有重要理论与工程意义的问题,本文以某20层钢框架结构的Benchmark模型为研究对象,通过对结构进行静力弹塑性分析(Pushover)和增量动力分析(IDA),研究了楼板刚度对结构地震需求分析结果以及结构抗震性能的影响。
6)FFL(Finish Floor Level)楼板高度
延伸阅读
高层建筑组合楼板工程高层建筑组合楼板工程暑高层建筑组合楼板工程一
